Thursday 24 April 2014

How to make a crate

As I have said repeatedly now, I have been working on terrain for the Malifaux tournament #goodbadfated (when it has no spaces left, I will probably stop plugging it... probably). I have been asked by a few people to make some 'how to' guides for what I am doing. I have not done it because, honestly, I am a little nervous. I am not exactly the best hobbyist in the world so I don't think my advice is going to be useful for many. But, on the suggestion of my better half, I have decided to start with something simple. How to make a crate.


First of all, what stuff do you need? For mine I used some polystyrene, just the stuff you get in packaging kitchen supplies etc. You will also need PVA glue, the right hand of kings. You will need something to act as the cladding, I used coffee stirrers because they are cheap and plentiful, which I purchased here. I used a normal pair of modelling clippers to cut them up. One other important thing you will need is a hot wire cutter for cutting the polystyrene. You could make one, shown with the pic of the big wooden frame above made by Nate Zettle and kindly loaned to me, or you could buy one, like my plastic thing below. It's much easier to get straight lines with the one above, because it's fixed.


First thing you will need to do is make some polystyrene cubes. I am making the crates for Malifaux so I would recommend 1" cubes because the height of the terrain will then simply be how high you stack them.

next you will need to cut your coffee stirrers into 1" lengths. Don't cut them all up, you will need slightly longer ones later.

next simply PVA your sticks to the polystyrene, like shown in the picture below.

after that, cut some more sticks so that they were slightly longer than 1", just enough to reach the end of the boxes. The easiest way would be to simply hold the stirrers against your crates as you cut so you know what measurement you will need.

Finally, attach the last of your sticks perpendicular to the ones that are already there, but only a couple on each facing.

And there we have it, some crates ready for painting!

Honestly I think it's easy, but my girlfriend said that she would not have thought of doing it so it was worth posting a blog post about it. Hope it's useful to somebody.






2 comments:

  1. this definitely be useful for making a swamp board to go with my gremlins when they finally release them. simple but effective.

    ReplyDelete
  2. Thanks. My gremlins will hopefully be in next week, I can't wait much longer!

    ReplyDelete